IDES Prospector Already have an account? Login Here

IDES

IROGRAN® A 85 H 4508

Thermoplastic Polyurethane Elastomer (Polyester)

Supplied by Huntsman Corporation

The technical datasheet with complete property values for IROGRAN® A 85 H 4508 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
IROGRAN A 85 H 4508 is a thermoplastic polyester-polyurethane for injection moulding applications.

Additional characteristics of the product are excellent mechanical properties and high tear strength.

PERFORMANCE FEATURES
  • Easy demolding
  • High production rates
  • Dynamically highly loadable
  • High demolding stability
  • Recyclable

APPLICATIONS
For the production of mining screens, casual shoe soles conveyor rollers, top lifts, wheels and rollers.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Mold Release
  • Good Tear Strength
  • Recyclable Material
Uses 
  • Mining Applications
  • Rollers
  • Wheels
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
-- 2
 
  
--
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (190°C/21.6 kg)
in³/10min
  
Molding Shrinkage - Flow (Injection Molded)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Abrasion 2
mm³
 ISO 4649
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 2
     DIN 53504
100% Strain
psi
  
300% Strain
psi
  
Tensile Stress 2 (Break)
psi
 DIN 53504
Tensile Elongation 2 (Break)
%
 DIN 53504
Tear Strength 2
lbf/in
 ISO 34-1
Compression Set 2
     ASTM D395, ISO 815
73°F, 24.0 hr
%
  
158°F, 24.0 hr
%
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240, ISO 868
Shore A, Injection Molded
 
  
Shore D, Injection Molded
 
  
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: IROGRAN® A 85 H 4508, IROGRAN A 85 H 4508, IROGRAN® , IROGRAN, IROGRANA85H4508, A 85 H 4508, A85, 85H, H4508, A85H4508, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyester), Thermoplastic Polyurethane Elastomer Polyester, TPU-Polyester, TPUPolyester, TPU:Polyester, TPU/Polyester, TPU+Polyester, TPU_Polyester, TPU Polyester, Thermoplastic Polyurethane, TPU, Huntsman, ThermoplasticPolyurethaneElastomerPolyester, ThermoplasticPolyurethane, 85A
Features
Features may also be described by the following terms: Good Tear Strength, Good Mold Release, Easy Release, Good Demolding.
Uses
Uses may also be described by the following terms: Rollers, Roller.
Injection
Nominal Value
Unit
 
Drying Temperature
      
--
°F
  
Hot Air Dryer
°F
  
Drying Time
      
--
hr
  
Hot Air Dryer
hr
  
Dew Point
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Hopper Temperature
°F
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Injection Molded
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.