IDES Prospector Already have an account? Login Here

IDES

IROGRAN® A 88 H 4622

Thermoplastic Polyurethane Elastomer (Polyester)

Supplied by Huntsman Corporation

The technical datasheet with complete property values for IROGRAN® A 88 H 4622 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
IROGRAN A 88 H 4622 is a black colored thermoplastic polyether/polyester-polyurethane for injection moulding and extrusion applications.

Additional characteristics of the product are high extrudability and low-adhesion surfaces.

PERFORMANCE FEATURES
  • High hydrolysis resistance
  • Low-adhesion surfaces
  • Good melt flow
  • High production rates
  • High wear resistance

APPLICATIONS
For the production of jackets for high pressure hoses, jacket material for cableshoses, profiles.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Flow
  • Good Wear Resistance
  • Hydrolysis Resistant
Uses 
  • Cable Jacketing
  • Hose
  • Profiles
RoHS Compliance 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity 2
      
--
 
  
--
g/cm³
  
Melt Volume-Flow Rate (MVR) (190°C/21.6 kg)
in³/10min
  
Molding Shrinkage - Flow (Injection Molded)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Abrasion 2
mm³
 ISO 4649
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 2
      
100% Strain
psi
 ASTM D412
100% Strain
psi
 DIN 53504
300% Strain
psi
 ASTM D412
300% Strain
psi
 DIN 53504
Tensile Strength 2
      
Break
psi
 ASTM D412
Break
psi
 DIN 53504
Tensile Elongation 2 (Break)
%
 ASTM D412, DIN 53504
Tear Strength 2
      
--
lbf/in
 ASTM D624
--
lbf/in
 ISO 34-1
Compression Set 2
     ASTM D395, ISO 815
73°F, 24.0 hr
%
  
158°F, 24.0 hr
%
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240, ISO 868
Shore A, Injection Molded
 
  
Shore D, Injection Molded
 
  
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: IROGRAN® A 88 H 4622, IROGRAN A 88 H 4622, IROGRAN® , IROGRAN, IROGRANA88H4622, A 88 H 4622, A88, 88H, H4622, A88H4622, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyester), Thermoplastic Polyurethane Elastomer Polyester, TPU-Polyester, TPUPolyester, TPU:Polyester, TPU/Polyester, TPU+Polyester, TPU_Polyester, TPU Polyester, Thermoplastic Polyurethane, TPU, Huntsman, ThermoplasticPolyurethaneElastomerPolyester, ThermoplasticPolyurethane, 88A
Features
Features may also be described by the following terms: Good Wear Resistance, Wear Resistant, Good Flow.
Notes
1Typical properties: these are not to be construed as specifications.
2Injection Molded
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.