IDES Prospector Already have an account? Login Here

IDES

FORMPOLY N6GF15

Polyamide 6

Glass Fiber Reinforcement, 15%

Supplied by Formulated Polymers Limited

The technical datasheet with complete property values for FORMPOLY N6GF15 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Heat stabilized Chemically coupled Glass Fiber Reinforced Grades with excellent mechanical and thermal properties. Offers reduced shrinkage.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 15% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Chemically Coupled
  • Heat Stabilized
  • Low Shrinkage
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Yield)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: FORMPOLY N6GF15, FORMPOLY , FORMPOLYN6GF15, N 6 GF 15, N6GF15, N6, 6GF, GF15, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Formulated Poly, Polyamide6, Nylon6, 6N
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Low Shrinkage, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Notes
Annealing Temperature: 120°C
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.