IDES Prospector Already have an account? Login Here

IDES

Panlite® G-3420R

Polycarbonate

Glass Fiber Reinforcement, 20%

Supplied by Teijin Kasei America, Inc. (Teijin Chemicals)

The technical datasheet with complete property values for Panlite® G-3420R is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Additive 
  • Mold Release
Features 
  • Good Mold Release
  • High Rigidity
  
Uses 
  • Machine/Mechanical Parts
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage
      
Flow
in/in
 ASTM D955
Across Flow
in/in
 ASTM D955
Across Flow
%
 ISO 294-4
Flow
%
 ISO 294-4
Water Absorption (73°F, 24 hr)
%
 ASTM D570, ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
--
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Break
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Tensile Elongation
      
Break
%
 ASTM D638
Break
%
 ISO 527-2/5
Flexural Modulus
      
--
psi
 ASTM D790
-- 2
psi
 ISO 178
Flexural Strength
      
-- 2
psi
 ISO 178
Yield
psi
 ASTM D790
Compressive Strength
psi
 ASTM D695
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179
Notched Izod Impact
     ASTM D256
0.126 in
ft·lb/in
  
0.252 in
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed
°F
 ASTM D648
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ASTM D648, ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
CLTE
      
Flow
in/in/°F
 ASTM D696
Flow
in/in/°F
 ISO 11359-2
Transverse
in/in/°F
 ASTM D696
Transverse
in/in/°F
 ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Volume Resistivity
      
--
ohm·cm
 ASTM D257
--
ohm·cm
 IEC 60093
Dielectric Strength
      
0.0630 in 3
V/mil
 ASTM D149
--
V/mil
 IEC 60243-1
Dielectric Constant
      
60 Hz
 
 ASTM D150
1 MHz
 
 ASTM D150
100 Hz
 
 IEC 60250
1 MHz
 
 IEC 60250
Dissipation Factor
      
60 Hz
 
 ASTM D150
1 MHz
 
 ASTM D150, IEC 60250
100 Hz
 
 IEC 60250
Arc Resistance
sec
 ASTM D495
Comparative Tracking Index
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0169 in
 
  
0.0315 in
 
  
0.118 in
 
  
UL
Nominal Value
Unit
Test Method
RTI Str (0.0579 in)
°F
 UL 746
RTI Imp (0.0579 in)
°F
 UL 746
RTI Elec (0.0579 in)
°F
 UL 746
Comparative Tracking Index (CTI)
V
 UL 746
Additional Information
Electric Strength, IEC 60243-1, Short Time Test: 35 MV/m
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Panlite® G-3420R, Panlite G3420R, Panlite® , Panlite, PanliteG3420R, G 3420 R, G-3420R, G3420R, G:3420R, G/3420R, G+3420R, G_3420R, G 3420R, G3420, 3420R, Polycarbonate, PC, Teijin, 3420G
Features
Features may also be described by the following terms: High Rigidity, Good Mold Release, Easy Release, Good Demolding.
Uses
Uses may also be described by the following terms: Machine Parts, Mechanical Parts, Machine/Mechanical Parts.
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
3Method C (Slow Rate-of-Rise)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.