IDES Prospector Already have an account? Login Here

IDES

Panlite® G-3120PH

Polycarbonate

Glass Fiber Reinforcement, 20%

Supplied by Teijin Kasei America, Inc. (Teijin Chemicals)

The technical datasheet with complete property values for Panlite® G-3120PH is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Features 
  • Good Surface Finish
Uses 
  • Camera Applications
  • Coating Applications
  • Engineering Parts
  • Housings
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage
      
Flow
in/in
 ASTM D955
Across Flow
in/in
 ASTM D955
Across Flow
%
 ISO 294-4
Flow
%
 ISO 294-4
Water Absorption (73°F, 24 hr)
%
 ASTM D570, ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Strength
      
Break
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Tensile Elongation (Break)
%
 ASTM D638, ISO 527-2/5
Flexural Modulus
      
--
psi
 ASTM D790
-- 2
psi
 ISO 178
Flexural Strength
      
-- 2
psi
 ISO 178
Yield
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179
Notched Izod Impact (0.126 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ASTM D648
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
CLTE
     ISO 11359-2
Flow
in/in/°F
  
Transverse
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Comparative Tracking Index
V
 IEC 60112
Electric Strength
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0669 in)
 
 UL 94
UL
Nominal Value
Unit
Test Method
RTI Str (0.0579 in)
°F
 UL 746
RTI Imp (0.0579 in)
°F
 UL 746
RTI Elec (0.0579 in)
°F
 UL 746
Additional Information
Electric Strength, IEC 60243-1, Short Time Test: 35 MV/m
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Panlite® G-3120PH, Panlite G3120PH, Panlite® , Panlite, PanliteG3120PH, G 3120 PH, G-3120PH, G3120PH, G:3120PH, G/3120PH, G+3120PH, G_3120PH, G 3120PH, G3120, 3120PH, Polycarbonate, PC, Teijin, 3120G
Features
Features may also be described by the following terms: Good Surface Finish.
Uses
Uses may also be described by the following terms: Engineering Parts, Housings, Housing, Camera Applications, Cameras.
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.