IDES Prospector Already have an account? Login Here

IDES

Panlite® BN-8110R

Polycarbonate

Carbon Fiber Reinforcement, 10%

Supplied by Teijin Kasei America, Inc. (Teijin Chemicals)

The technical datasheet with complete property values for Panlite® BN-8110R is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Carbon Fiber Reinforcement, 10% Filler by Weight
Additive 
  • Mold Release
Features 
  • Flame Retardant
  • Good Mold Release
  • High Rigidity
Uses 
  • Engineering Parts
  • Machine/Mechanical Parts
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage
      
Flow
in/in
 ASTM D955
Across Flow
in/in
 ASTM D955
Across Flow
%
 ISO 294-4
Flow
%
 ISO 294-4
Water Absorption (73°F, 24 hr)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Strength
      
Break
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Tensile Elongation
      
Break
%
 ASTM D638
Break
%
 ISO 527-2/5
Flexural Modulus
      
--
psi
 ASTM D790
-- 2
psi
 ISO 178
Flexural Strength
      
-- 2
psi
 ISO 178
Yield
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179
Notched Izod Impact
     ASTM D256
0.126 in
ft·lb/in
  
0.252 in
ft·lb/in
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed
°F
 ASTM D648
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
CLTE
     ISO 11359-2
Flow
in/in/°F
  
Transverse
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
      
--
ohms
 ASTM D257
--
ohms
 IEC 60093
Volume Resistivity
      
--
ohm·cm
 ASTM D257
--
ohm·cm
 IEC 60093
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0295 in
 
  
0.0591 in
 
  
UL
Nominal Value
Unit
Test Method
RTI Str (0.0579 in)
°F
 UL 746
RTI Imp (0.0579 in)
°F
 UL 746
RTI Elec (0.0579 in)
°F
 UL 746
Additional Information
Volume resistivity, ASTM D257: 1e2 to 1e5 ohm-m
Surface resistivity, ASTM D257: 1e3 to 1e7 ohm
Volume resistivity, IEC 60093: 1 to 1e2 ohm-m
Surface resistivity, IEC 60093: 1e1 to 1e3 ohm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Panlite® BN-8110R, Panlite BN8110R, Panlite® , Panlite, PanliteBN8110R, BN, BN 8110 R, BN-8110R, BN8110R, BN:8110R, BN/8110R, BN+8110R, BN_8110R, BN 8110R, BN8110, 8110R, Polycarbonate, PC, Teijin, 8110BN
Features
Features may also be described by the following terms: High Rigidity, Good Mold Release, Easy Release, Good Demolding.
Uses
Uses may also be described by the following terms: Engineering Parts, Machine Parts, Mechanical Parts, Machine/Mechanical Parts.
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.