BRALEN FB 03-55 Slovnaft Polyethylene, Low Density

Product Description

BRALEN FB 03-55 is a film grade of low density polyethylene containing UV stabilizer and antistatic agent.

BRALEN FB 03-55 is designed for production of shrink wrapping and technical films. They are characterized by good mechanical properties, lower formation of electrostatic charge on the film surface and improved UV resistance. Recommended film thickness is 0.07 - 0.25 mm.

Lifetime of 0.12 mm film in the Middle Europe climate is approximately one year. In the case of the film downgauging or mixing of Bralen FB 03-55 with other polymers the lifetime is reduced.

General

Material Status

Commercial: Active

Availability

Europe

Additive

Antistatic

UV Stabilizer

Features

Antistatic

Good UV Resistance

Uses

Film

Shrink Wrap

Forms

Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/C
Melt Mass-Flow Rate (MFR)² (190°C/2.16 kg)		g/10 min	ISO 1133
Environmental Stress-Cracking Resistance (100% Antarox CO-630, F50)		hr	ASTM D1693A
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2/1A/50
Films	Nominal Value	Unit	Test Method
Tensile Strength			ISO 527-3/2/300
MD: 2.8 mil		psi
TD: 2.8 mil		psi
Tensile Elongation			ISO 527-3/2/300
MD: Break, 2.8 mil		%
TD: Break, 2.8 mil		%
Dart Drop Impact (2.8 mil)		g	ISO 7765-1/A
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/A50
Additional Information
Film properties are for a film thickness of 0.07 mm, blow-up ratio 1:2.5. Dynamic Coefficient of Friction, ISO 8295: 0.4
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BRALEN® FB 03-55, BRALEN FB 0355, BRALEN® , BRALEN, BRALENFB0355, FB 03, FB 03-55, FB 0355, FB 03:55, FB 03/55, FB 03+55, FB 03_55, FB 03 55, FB03, 0355, FB0355, FB03_55, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Slovnaft, PolyethyleneLowDensity, 03FB
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Shrink Wrap.

Notes

¹Typical properties: these are not to be construed as specifications.

²Procedure A

BRALEN® FB 03-55

Low Density Polyethylene

Supplied by Slovnaft Petrochemicals, s.r.o.