IDES Prospector Already have an account? Login Here

IDES

BRALEN® FB 3-32

Low Density Polyethylene

Supplied by Slovnaft Petrochemicals, s.r.o.

The technical datasheet with complete property values for BRALEN® FB 3-32 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BRALEN FB 3-32 is a film grade of low density polyethylene. It is used for the production of bubble films. Recommended film thickness is 0.040 - 0.100 mm.

BRALEN FB 3-32 meets the requirements of the Slovak Hygienic Regulations for Contact with Foodstuffs, conforms to the Commission Directives 90/128/EEC, 92/39/EEC, 93/9/EEC, 95/3/EC, 96/11/EC, 99/91/EC, 2001/62/EC and corresponds with the Health Regulations of Germany (BGVV), A III (PE).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Food Contact Acceptable
Uses 
  • Film
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/C
Melt Mass-Flow Rate (MFR) 2 (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2/1A/50
Films
Nominal Value
Unit
Test Method
Tensile Strength
     ISO 527-3/2/300
MD: 1.6 mil
psi
  
TD: 1.6 mil
psi
  
Tensile Elongation
     ISO 527-3/2/300
MD: Break, 1.6 mil
%
  
TD: Break, 1.6 mil
%
  
Dart Drop Impact (1.6 mil)
g
 ISO 7765-1/A
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Optical
Nominal Value
Unit
Test Method
Haze
%
 ASTM D1003
Additional Information
Film properties are for a film thickness of 0.04 mm, blow-up ratio 1:2.5.
Dynamic Coefficient of Friction, ISO 8295: 1.2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BRALEN® FB 3-32, BRALEN FB 332, BRALEN® , BRALEN, BRALENFB332, FB 3, FB 3-32, FB 332, FB 3:32, FB 3/32, FB 3+32, FB 3_32, FB 3 32, FB3, 332, FB332, FB3_32, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Slovnaft, PolyethyleneLowDensity, 3FB
Notes
1Typical properties: these are not to be construed as specifications.
2Procedure A
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.