IDES Prospector Already have an account? Login Here

IDES

BRALEN® NA 7-25

Low Density Polyethylene

Supplied by Slovnaft Petrochemicals, s.r.o.

The technical datasheet with complete property values for BRALEN® NA 7-25 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BRALEN NA 7-25 is a low density polyethylene intended mainly for extrusioin coating. This grade is additives free.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Additive Free
  • Food Contact Acceptable
  • Good Heat Seal
  • Recyclable Material
  
Uses 
  • Coating Applications
  • Fabric Coatings
  • Foil Coatings
  • Packaging
  • Paper Coatings
  • Pharmaceutical Packaging
Forms 
  • Pellets
Processing Method 
  • Extrusion Coating
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ISO 527-3
MD: 1.6 mil, Blown Film
psi
  
TD: 1.6 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 1.6 mil, Blown Film
%
  
TD: Break, 1.6 mil, Blown Film
%
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Injection Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BRALEN NA 7 25, BRALEN® NA 7-25 , BRALEN NA 725, BRALEN® , BRALEN, BRALENNA725, NA 7, NA 7-25, NA 725, NA 7:25, NA 7/25, NA 7+25, NA 7_25, NA 7 25, NA7, 725, NA725, NA7_25, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Slovnaft, PolyethyleneLowDensity, 7NA
Features
Features may also be described by the following terms: Good Heat Seal, Additive Free, No Additives.
Uses
Uses may also be described by the following terms: Fabric Coatings, Fabric Coating, Paper Coatings, Paper Coating, Pharmaceutical Packaging, Foil Coatings, Foil Coating.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.