TATREN FD 152 Slovnaft Polypropylene Homopolymer

Product Description

TATREN FD 152 is a homopolymer of a broad molecular weight distribution designed for weaving tapes. The film for the production of tapes can either be blown cooled by air or cast cooled by chill-rolls or water bath. The additive package provides low water carry over. The narrow range of melt flow rate and good thermal stabilization offer high processing reliability in production of high performance products. The typical aplications are cords and bags.

TATREN FD 152 meets the requirements of the Slovak Hygienic Regulations for Contact with Foodstuffs, conforms to the Commission Directive 2002/72/EC, Art.2 in the simulants A, B, C and D specified in the Commission Directive 85/572/EEC when determined in accordance with the Commission Directives 82/711/EEC, 93/8/EEC, 97/48/EC and corresponds with the Health Regulations of Germany (BGVV), A VII (PP).

General

Material Status

Commercial: Active

Availability

Europe

Features

Food Contact Acceptable

Good Processability

Good Thermal Stability

Homopolymer

Low Water Carryover

Med.-Wide Molecular Weight Distrib.

Uses

Bags

Film

Tape

Forms

Pellets

Processing Method

Blown Film

Cast Film

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/C
Melt Mass-Flow Rate (MFR)			ISO 1133
230°C/2.16 kg²		g/10 min
230°C/5.0 kg³		g/10 min
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1A/50
Tensile Stress (Yield)		psi	ISO 527-2/1A/50
Tensile Strain (Yield)		%	ISO 527-2/1A/50
Flexural Modulus⁴		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179/1eA
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/A50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TATREN® FD 152, TATREN FD 152, TATREN® , TATREN, TATRENFD152, FD 152, FD152, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Slovnaft, PolypropyleneHomopolymer, PPHomopolymer, 152FD
Features
Features may also be described by the following terms: Low Water Carryover, Good Thermal Stability, Good Processability, Easy Processing, Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution.

Notes

¹Typical properties: these are not to be construed as specifications.

²Procedure A

³Procedure B

⁴0.079 in/min

TATREN® FD 152

Polypropylene Homopolymer

Supplied by Slovnaft Petrochemicals, s.r.o.