IDES Prospector Already have an account? Login Here

IDES

TATREN® FE 153

Polypropylene Homopolymer

Supplied by Slovnaft Petrochemicals, s.r.o.

The technical datasheet with complete property values for TATREN® FE 153 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TATREN FE 153 and FD 154 are homopolymers of a broad molecular weight distribution. They show good thermal stability. Both grades are designed for weaving tapes production. Cast film for the production of tapes can either be cooled by chill-rolls or water bath. The additive package provides low water carry over. Tapes made of TATREN FD 154 are mostly used for bags and cords, these of TATREN FE 153 for backing and technical textures.

TATREN FE 153 and FD 154 meet the requirements of the Slovak Hygienic Regulations for Contact with Foodstuffs, conform to the Commission Directive 2002/72/EC, Art.2 in the simulants A, B, C and D specified in the Commission Directive 85/572/EEC when determined in accordance with the Commission Directives 82/711/EEC, 93/8/EEC, 97/48/EC and correspond with the Health Regulations of Germany (BGVV), A VII (PP).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Food Contact Acceptable
  • Good Thermal Stability
  • Homopolymer
  • Low Water Carryover
  • Med.-Wide Molecular Weight Distrib.
Uses 
  • Bags
  • Tape
  
Forms 
  • Pellets
Processing Method 
  • Cast Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/C
Melt Mass-Flow Rate (MFR)
     ISO 1133
230°C/2.16 kg 2
g/10 min
  
230°C/5.0 kg 3
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/50
Tensile Stress (Yield)
psi
 ISO 527-2/1A/50
Tensile Strain (Yield)
%
 ISO 527-2/1A/50
Flexural Modulus 4
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TATREN® FE 153, TATREN FE 153, TATREN® , TATREN, TATRENFE153, FE 153, FE153, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Slovnaft, PolypropyleneHomopolymer, PPHomopolymer, 153FE
Features
Features may also be described by the following terms: Low Water Carryover, Good Thermal Stability, Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution.
Notes
1Typical properties: these are not to be construed as specifications.
2Procedure A
3Procedure B
40.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.