IDES Prospector Already have an account? Login Here

IDES

TATREN® FF 520

Polypropylene Homopolymer

Supplied by Slovnaft Petrochemicals, s.r.o.

The technical datasheet with complete property values for TATREN® FF 520 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TATREN FF 520 is a homopolymer of a broad molecular weight distribution. It shows medium thermal stability and contains medium concentration of slip agent and higher content of antiblocking agent. TATREN FF 520 is especially designed for water quenched blown films. Tubular films made of this grade have a very good openability.

TATREN FF 520 meets the requirements of the Slovak Hygienic Regulations for Contact with Foodstuffs, conforms to the Commission Directive 2002/72/EC, Art.2 in the simulants A, B, C and D specified in the Commission Directive 85/572/EEC when determined in accordance with the Commission Directives 82/711/EEC, 93/8/EEC, 97/48/EC and corresponds with the Health Regulations of Germany (BGVV), A VII (PP).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • High Antiblock
  • Medium Slip
  
Features 
  • Food Contact Acceptable
  • Good Thermal Stability
  • High Antiblocking
  • Homopolymer
  • Med.-Wide Molecular Weight Distrib.
  • Medium Slip
Uses 
  • Film
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/C
Melt Mass-Flow Rate (MFR) 2
     ISO 1133
230°C/2.16 kg
g/10 min
  
230°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/50
Tensile Stress (Yield)
psi
 ISO 527-2/1A/50
Tensile Strain (Yield)
%
 ISO 527-2/1A/50
Flexural Modulus 3
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TATREN® FF 520, TATREN FF 520, TATREN® , TATREN, TATRENFF520, FF 520, FF520, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Slovnaft, PolypropyleneHomopolymer, PPHomopolymer, 520FF
Features
Features may also be described by the following terms: High Antiblocking, High Antiblock, Good Thermal Stability, Medium Slip, Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution.
Notes
1Typical properties: these are not to be construed as specifications.
2Procedure B
30.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.