IDES Prospector Already have an account? Login Here

IDES

TATREN® ME 311

Polypropylene Homopolymer

Supplied by Slovnaft Petrochemicals, s.r.o.

The technical datasheet with complete property values for TATREN® ME 311 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TATREN ME 311 is a homopolymer of a broad molecular weight distribution. It shows a good processing stability and an excellent long-term heat resistance. TATREN ME 311 is designed for injection moulding of technical items, especially for applications where a long-term heat resistance is required. This grade is suited for items permanently heat-exposed up to 105 °C.

TATREN ME 311 meets the requirements of the Slovak Hygienic Regulations for Contact with Foodstuffs, conforms to the Commission Directive 2002/72/EC, Art.2 in the simulants A, B, C and D specified in the Commission Directive 85/572/EEC when determined in accordance with the Commission Directives 82/711/EEC, 93/8/EEC, 97/48/EC and corresponds with the Health Regulations of Germany (BGVV), A VII (PP).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Food Contact Acceptable
  • Good Processing Stability
  • High Heat Resistance
  • Homopolymer
  • Med.-Wide Molecular Weight Distrib.
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/C
Melt Mass-Flow Rate (MFR)
     ISO 1133
230°C/2.16 kg 2
g/10 min
  
230°C/5.0 kg 3
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/50
Tensile Stress (Yield)
psi
 ISO 527-2/1A/50
Tensile Strain (Yield)
%
 ISO 527-2/1A/50
Flexural Modulus 4
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TATREN® ME 311, TATREN ME 311, TATREN® , TATREN, TATRENME311, ME 311, ME311, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Slovnaft, PolypropyleneHomopolymer, PPHomopolymer, 311ME
Features
Features may also be described by the following terms: Good Processing Stability, Good Process Stability, Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution, High Heat Resistance.
Notes
1Typical properties: these are not to be construed as specifications.
2Procedure A
3Procedure B
40.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.