IDES Prospector Already have an account? Login Here

IDES

TATREN® MG 350

Polypropylene Homopolymer

Supplied by Slovnaft Petrochemicals, s.r.o.

The technical datasheet with complete property values for TATREN® MG 350 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TATREN MG 350 is a homopolymer of a broad molecular weight distribution. It shows a good processing stability and an excellent long-term heat resistance. TATREN MG 350 is designed for the injection moulding of technical items where a good flow and long-term heat resistance is required. It can be used for large size and thin wall items.

TATREN MG 350 meets the requirements of the Slovak Hygienic Regulations for Contact with Foodstuffs, conforms to the Commission Directive 2002/72/EC, Art.2 in the simulants A, B, C and D specified in the Commission Directive 85/572/EEC when determined in accordance with the Commission Directives 82/711/EEC, 93/8/EEC, 97/48/EC and corresponds with the Health Regulations of Germany (BGVV), A VII (PP). The grade complies with the European Standard EN 71, part 3.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Food Contact Acceptable
  • Good Flow
  • Good Processing Stability
  • High Heat Resistance
  • Homopolymer
  • Med.-Wide Molecular Weight Distrib.
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/C
Melt Mass-Flow Rate (MFR) 2
     ISO 1133
230°C/2.16 kg
g/10 min
  
230°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/50
Tensile Stress (Yield)
psi
 ISO 527-2/1A/50
Tensile Strain (Yield)
%
 ISO 527-2/1A/50
Flexural Modulus 3
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TATREN® MG 350, TATREN MG 350, TATREN® , TATREN, TATRENMG350, MG 350, MG350, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Slovnaft, PolypropyleneHomopolymer, PPHomopolymer, 350MG
Features
Features may also be described by the following terms: Good Processing Stability, Good Process Stability, Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution, High Heat Resistance, Good Flow.
Notes
1Typical properties: these are not to be construed as specifications.
2Procedure B
30.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.