IDES Prospector Already have an account? Login Here

IDES

TATREN® MH 950

Polypropylene Homopolymer

Supplied by Slovnaft Petrochemicals, s.r.o.

The technical datasheet with complete property values for TATREN® MH 950 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TATREN MH 950 is a special homopolymer of a narrow molecular weight distribution, which offers outstanding transparency and very good processability by injection moulding technology. It contains clarifying and slip agents.

TATREN MH 950 is especially suitable for injection moulding of thin wall packaging. High transparency of final products can be achieved only by using a highly polished mould. Products made of Tatren MH 950 are characterized by increased modulus of elasticity in flexure. The tensile strength at yield and a hardness are also higher. The special additivation of this grade offers advantage of reduction a moulding cycle due to decreased processing temperature.

TATREN MH 950 meets the requirements of the Slovak Hygienic Regulations for Contact with Foodstuffs, conforms to the Commission Directive 2002/72/EC, Art.2 in the simulants A, B, C and D specified in the Commission Directive 85/572/EEC when determined in accordance with the Commission Directives 82/711/EEC, 93/8/EEC, 97/48/EC and corresponds with the Health Regulations of Germany (BGVV), A VII (PP).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Clarifier
  • Slip
  
Features 
  • Food Contact Acceptable
  • Good Processability
  • High Clarity
  • Homopolymer
  • Narrow Molecular Weight Distribution
  • Slip
Uses 
  • Thin-walled Packaging
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/C
Melt Mass-Flow Rate (MFR) 2 (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/50
Tensile Stress (Yield)
psi
 ISO 527-2/1A/50
Tensile Strain (Yield)
%
 ISO 527-2/1A/50
Flexural Modulus 3
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TATREN® MH 950, TATREN MH 950, TATREN® , TATREN, TATRENMH950, MH 950, MH950, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Slovnaft, PolypropyleneHomopolymer, PPHomopolymer, 950MH
Features
Features may also be described by the following terms: Slip, Unspecified Slip, Good Processability, Easy Processing, Narrow Molecular Weight Distribution, Narrow MW Distribution, High Clarity.
Uses
Uses may also be described by the following terms: Thin-walled Packaging, Thin-wall Packaging, Thinwall Packaging.
Notes
1Typical properties: these are not to be construed as specifications.
2Procedure B
30.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.