TECHNYL® C 218 V33 Rhodia Polyamide 6 (Glass Fiber Reinforcement, 33%)

Product Description

Polyamide PA6, reinforced with 33% of glass fibre, heat stabilized, for injection molding.

It has good mechanical properties, it is used in all sectors of industry offering an excellent combination between thermal and mechanical properties.

It is used in the automotive industry and electrical sectors.

General

Material Status

Commercial: Active

Availability

Europe

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 33% Filler by Weight

Additive

Heat Stabilizer

Features

Heat Stabilized

Uses

Automotive Applications

Electrical/Electronic Applications

Automotive Specifications

Appearance

Colors Available

Forms

Pellets

Processing Method

Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183/A
Molding Shrinkage				ISO 294-4
Across Flow		--	%
Flow		--	%
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2
Tensile Stress (Break)			psi	ISO 527-2
Tensile Strain (Break)			%	ISO 527-2
Flexural Modulus			psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength			ft·lb/in²	ISO 179/1eA
Notched Izod Impact Strength			ft·lb/in²	ISO 180
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		--	°F	ISO 75-2/A
Melting Temperature (DSC)		--	°F	ISO 3146
CLTE - Flow (73 to 185°F)		--	in/in/°F	ASTM E831
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity			ohm	IEC 60093
Volume Resistivity			ohm·cm	IEC 60093
Relative Permittivity (1 MHz)				IEC 60250
Dissipation Factor (1 MHz)				IEC 60250
Comparative Tracking Index			V	IEC 60112
Electric Strength	--		V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL (0.0630 in)		--		UL 94
Glow Wire Ignition Temperature (0.0630 in)		--	°F	IEC 60695-2-13
Additional Information
Dry	The values listed as Molding Shrinkage, ISO 294, were tested in accordance with NYLTECH test methods.
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® C 218 V33, TECHNYL C 218 V33, TECHNYL® C , TECHNYL C, TECHNYLC218V33, TECHNYLC, C 218 V 33, C218 V33, C218, 218 V 33, C218V33, 218 V33, 218V, V33, 218V33, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Rhodia, Polyamide6, Nylon6, V218, 218C
Generic Name
Dry	Generic Name may also be described by the following terms: PA6.
Conditioned	Generic Name may also be described by the following terms: PA6.
Features
Dry	Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Dry	Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Automotive Applications, Automotive Sector.
Automotive Specifications
Dry	This plastic material has approval for 3 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (2), CHRYSLER (1).
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® C 218 V33, TECHNYL C 218 V33, TECHNYL® C , TECHNYL C, TECHNYLC218V33, TECHNYLC, C 218 V 33, C218 V33, C218, 218 V 33, C218V33, 218 V33, 218V, V33, 218V33, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Rhodia, Polyamide6, Nylon6, V218, 218C

Injection	Dry	Unit
Suggested Max Moisture		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

TECHNYL® C 218 V33

Polyamide 6

Glass Fiber Reinforcement, 33%

Supplied by Rhodia Engineering Plastics SA