HYDEL AC-10 Ensinger-Hyde Acetal (POM) Copolymer (Carbon Fiber Reinforcement, 10%)

Product Description

Hydel AC-10 is an electrically active, permanently static dissipative material. This material has acetal coupled with 10% carbon fiber to produce a wear resistant product that has a surface resistivity in the range of 10^2-10^6. Hydel AC-10 can be used in applications for equipment or assembles sensitive electronic components. Wear type applications such as rollers, bushings, gears, wear strips etc…where excellent wear is needed but the part cannot pick up a static charge.

General

Material Status

Commercial: Active

Availability

North America

Filler / Reinforcement

Carbon Fiber Reinforcement, 10% Filler by Weight

Features

Good Chemical Resistance

Good Wear Resistance

Uses

Bushings

Electrical Parts

Electrical/Electronic Applications

Gears

Rollers

Wear Strip

Forms

Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength		psi	ASTM D638
Tensile Elongation (Yield)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Flexural Strength		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact		ft·lb/in	ASTM D256
Unnotched Izod Impact		ft·lb/in	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)		°F	ASTM D648
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	ASTM D257
Volume Resistivity		ohm·cm	ASTM D257
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
Additional Information
MIL B-81750B, FED. STD. 101 B Method, 15% R.H.: <0.1 sec
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HYDEL® AC-10, HYDEL AC10, HYDEL® , HYDEL, HYDELAC10, AC, AC-10, AC10, AC:10, AC/10, AC+10, AC_10, AC 10, Acetal Copolymer, Acetal Copolymer, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, Ensinger-Hyde, AcetalPOMCopolymer, 10AC
Features
Features may also be described by the following terms: Good Wear Resistance, Wear Resistant, Good Chemical Resistance, Chemical Resistant.
Uses
Uses may also be described by the following terms: Wear Strip, Wear Strips, Rollers, Roller, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.

Notes

¹Typical properties: these are not to be construed as specifications.

HYDEL® AC-10

Acetal (POM) Copolymer

Carbon Fiber Reinforcement, 10%

Supplied by Ensinger-Hyde