IDES Prospector Already have an account? Login Here

IDES

Formolene® 5100H

Polypropylene Homopolymer

Supplied by Formosa Plastics Corporation, U.S.A.

The technical datasheet with complete property values for Formolene® 5100H is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Homopolymer for Strapping

Formolene® 5100H is a high molecular weight polypropylene homopolymer designed for various extrusion applications, notably strapping. It contains a unique combination of stabilizers and additives, which provides excellent processability and good end use performance.

Formolene® 5100H meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Unspecified Additive
  • Unspecified Stabilizer
  
Features 
  • Food Contact Acceptable
  • Good Processing Stability
  • High Molecular Weight
  • Homopolymer
  
Uses 
  • Strapping
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation 2 (Yield, Injection Molded)
%
 ASTM D638
Flexural Modulus - 1% Secant 3 (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, Injection Molded)
 
 ASTM D785
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Formolene® 5100H, Formolene 5100H, Formolene® , Formolene, Formolene5100H, 5100 H, 5100H, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Formosa Plastics, PolypropyleneHomopolymer, PPHomopolymer, H5100
Features
Features may also be described by the following terms: Good Processing Stability, Good Process Stability, High Molecular Weight, High MW.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.