IDES Prospector Already have an account? Login Here

IDES

Radici Compounds HPN200MG35L

Polyamide

Glass\Mineral, 35%

Supplied by Radici Plastics USA, Inc.

The technical datasheet with complete property values for Radici Compounds HPN200MG35L is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HPN200MG35L is a high performance polyamide compound reinforced with glass fiber and a special mineral at 35% by weight; developed for processing by injection molding, it contains an internal lubricant to ease mold release.

This compound combines good strength and high rigidity, especially at elevated temperatures, with good control of warpage in large areas or complex shaped parts.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass\Mineral, 35% Filler by Weight
Additive 
  • Lubricant
Features 
  • Good Mold Release
  • Good Strength
  • High Rigidity
  • Low Warpage
  • Lubricated
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow (0.125 in)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break, 73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Melting Temperature
°F
 ASTM D789
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Radici Compounds HPN200MG35L, Radici Compounds , RadiciCompoundsHPN200MG35L, RadiciCompounds, CompoundsHPN 200 MG 35 L, CompoundsHPN200MG35L, CompoundsHPN200, Compounds, HPN 200 MG 35 L, HPN200MG35L, HPN200, 200MG, MG35, 35L, Polyamide, Unspecified, Polyamide Unspecified, Nylon, Unspecified, Nylon Unspecified, Polyamide, Nylon, Radici USA, PolyamideUnspecified, NylonUnspecified, 200HPN, 200CompoundsHPN
Features
Features may also be described by the following terms: Good Strength, Low Warpage, Low Warp, High Rigidity, Good Mold Release, Easy Release, Good Demolding.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Cushion
in
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.