IDES Prospector Already have an account? Login Here

IDES

Conoptic DM-2320

Polyurethane Thermoset Elastomer

Supplied by Conap, Inc, a Division of Cytec Industries Inc.

The technical datasheet with complete property values for Conoptic DM-2320 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CONOPTIC® DM-2320 is a non-mercury catalyst, two-component, optically clear, rapid setting, polyurethane system designed for use in doming materials.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Appearance 
  • Clear/Transparent
Forms 
  • Liquid
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength
lbf/in
 ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Shelf Life (70°F)
wk
  
Thermoset Mix Viscosity (77°F)
cP
 ASTM D2393
Additional Information
Resin Viscosity @ 25°C: 1600 cP
Resin Specific Gravity: 1.05
Resin Color: Clear
Hardener Viscosity @ 25°C: 620 cP
Hardener Specific Gravity: 1.06
Hardener Color: Clear
Durometer Hardness, ASTM D2240, D Scale: 53 to 57
Full Cure @ 25°C, for maximum properties: 7 days
Gel Time @ 25°C: 7 to 9 min
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Conoptic DM-2320, Conoptic DM2320, Conoptic , ConopticDM2320, DM, DM-2320, DM2320, DM:2320, DM/2320, DM+2320, DM_2320, DM 2320, Polyurethane Thermoset Elastomer, TSU, Conap, PolyurethaneThermosetElastomer, 2320DM
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.