IDES Prospector Already have an account? Login Here

IDES

Oxy 75HC

Polyvinyl Chloride

Supplied by Occidental Chemical Corp. (OxyChem)

The technical datasheet with complete property values for Oxy 75HC is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OXY 75HC is a Hybrid® high molecular weight homopolymer PVC dispersion resin which is characterized by exceptional gloss and clarity. It was developed for applications such as clear top coats for vinyl floor coverings and other products requiring high gloss, clarity and physical strength.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • High Clarity
  • High Gloss
  • High Heat Resistance
  • High Molecular Weight
  • Homopolymer
Uses 
  • Coating Applications
  • Molds/Dies/Tools
  • Sheet
  • Textile Applications
  
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Physical
Nominal Value
 
Test Method
Specific Gravity
 
 ASTM D792
Additional Information
Relative Viscosity, 1% Solution in Cyclohexanone @ 25°C: 2.65
Inherent Viscosity, ASTM D1243: 1.17
K value, DIN 53726: 75
Brookfield Viscosity, Control Test No. 200, 20 rpm, poise: 35
Severs Viscosity, Control Test No. 210, 80 psig, poise: 100
Gelation Temperature: 165°F
Ultimate Tensile Strength, ASTM D882, 248°F: 450 psi
Ultimate Tensile Strength, ASTM D882, 302°F: 1100 psi
Ultimate Tensile Strength, ASTM D882, 356°F: 2500 psi
Ultimate Tensile Strength, ASTM D882, 410°F: 2650 psi
Clarity: Excellent
Classification, ASTM D1755-81: D4-22
CAS Number: 9002-86-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Oxy 75HC, Oxy , Oxy75HC, 75 HC, 75HC, Polyvinyl Chloride, Unspecified, Polyvinyl Chloride Unspecified, PVC, Unspecified, PVC Unspecified, Polyvinyl Chloride, PVC, Occidental, PolyvinylChlorideUnspecified, PVCUnspecified, PolyvinylChloride, HC75
Features
Features may also be described by the following terms: High Molecular Weight, High MW, High Heat Resistance, High Gloss, High Clarity.
Uses
Uses may also be described by the following terms: Molds/Dies/Tools, Molds, Dies, tools.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.