IDES Prospector Already have an account? Login Here

IDES

BMC 3001H

Thermoset Polyester

Glass\Mineral

Supplied by Bulk Molding Compounds, Inc.

The technical datasheet with complete property values for BMC 3001H is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BMC 3001H molding compound is a mineral filled, glass-fiber reinforced alkyd compound suitable for compression and transfer molding. Because of its soft flow, it is also used extensively in cold spur molding. This is a general-purpose material with good creep resistance and electrical properties. Typical applications include brush holders, voltage regulator housings and relay bases. BMC 3001H molding compound is produced in extruded form in a range of industrial colors. It is available in logs up to 12 inches in length or as precut slugs, of specific weight, in diameters from ¾ " to 2 7/8 ". Within this range smaller diameters are supplied as multiple extrusions and weight tolerances are plus or minus 5% up to a maximum of of plus 15 grams.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass\Mineral
Features 
  • General Purpose
  • Good Creep Resistance
  • Good Electrical Properties
Uses 
  • Electrical/Electronic Applications
  • General Purpose
  
Automotive Specifications 
Appearance 
  • Colors Available
Forms 
  • BMC - Bulk Molding Compound
Processing Method 
  • Compression Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow (Compression Molded)
in/in
 ASTM D955
Water Absorption (73°F, 24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Flexural Strength (Compression Molded)
psi
 ASTM D790
Compressive Strength
psi
 ASTM D695
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (Compression Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Barcol Hardness
 
 ASTM D2583
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, Compression Molded)
°F
 ASTM D648
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength 2
V/mil
 ASTM D149
Dielectric Constant (60 Hz)
 
 ASTM D150
Dissipation Factor (60 Hz)
 
 ASTM D150
Arc Resistance
sec
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL     UL 94
0.0625 in
 
  
0.125 in
 
  
0.250 in
 
  
UL
Nominal Value
Unit
Test Method
Comparative Tracking Index (CTI)
V
 UL 746
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BMC 3001H, BMC , BMC3001H, 3001 H, 3001H, Polyester, Thermoset, Polyester Thermoset, Polyester, TS, Polyester TS, Thermoset, TS, Bulk Molding, PolyesterThermoset, PolyesterTS, H3001
Features
Features may also be described by the following terms: Good Electrical Properties, Good Creep Resistance, Creep Resistant.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1).
Injection
Nominal Value
Unit
 
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Method A (Short-Time)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.