IDES Prospector Already have an account? Login Here

IDES

DAI-EL™ G-752

Fluoroelastomer

Supplied by DAIKIN AMERICA, INC.

The technical datasheet with complete property values for DAI-EL™ G-752 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DAI-EL G-752 is a polyol-curable fluoroelastomer. It offers good mechanical properties and adhesion.

Formulation
Rubber: 100 parts
MT Carbon Black "Thermax N-990": 20 parts
Magnesium oxide "MA-150": 3 parts
Calcium hydroxide "CALDIC#2000": 6 parts
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Adhesion
Uses 
  • Seals
Appearance 
  • White
Forms 
  • Pellets
Physical
Nominal Value
Unit
 
Specific Gravity
 
  
Elastomers
Nominal Value
Unit
 
Tensile Stress (100% Strain)
psi
  
Tensile Strength (Yield)
psi
  
Tensile Elongation (Break)
%
  
Compression Set 2
      
77°F, 70.0 hr
%
  
212°F, 70.0 hr
%
  
347°F, 70.0 hr
%
  
392°F, 70.0 hr
%
  
Hardness
Nominal Value
Unit
 
Durometer Hardness (Shore A)
 
  
Additional Information
Nominal Value
Unit
 
Adhesiveness Test 3
      
Peeled State - AI
%
  
Peeled State - SS
%
  
Peeled State - SUS
%
  
Cure Temperature 4
°F
  
Cure Time 4
      
Cure time
min
  
Induction time
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DAI-EL™ G-752, DAIEL G752, DAI-EL™ , DAIEL, DAI:EL™, DAI/EL™, DAI+EL™, DAI_EL™, DAI EL™, DAIELG752, DAI_EL, DAI EL, G-752, G752, G:752, G/752, G+752, G_752, G 752, Fluoroelastomer, Fluorelastomer, Fluoropolymer, Daikin, 752G
Features
Features may also be described by the following terms: Good Adhesion.
Notes
1Typical properties: these are not to be construed as specifications.
2P-24 O-ring
3Bonding agent: Chemlock 607, After oven-curing
4Curelastometer type II
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.