IDES Prospector Already have an account? Login Here

IDES

WellPet® GF100-BK1

Polyethylene Terephthalate

Glass Fiber Reinforcement, 30%

Supplied by Wellman Engineering Resins

The technical datasheet with complete property values for WellPet® GF100-BK1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage
     ISO 294-4
Across Flow: 73°F
%
  
Flow: 73°F
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain (Yield, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Melting Temperature (DSC)
°F
 ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WellPet® GF100-BK1, WellPet GF100BK1, WellPet® , WellPet, WellPetGF100BK1, GF 100, GF 100 BK 1, GF100-BK1, GF100BK1, GF100:BK1, GF100/BK1, GF100+BK1, GF100_BK1, GF100 BK1, GF100, 100BK, BK1, Polyethylene Terephthalate, PET, Polyester, Wellman, PolyethyleneTerephthalate, 100GF
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.