Reny® G07S Mitsubishi EP Polyarylamide (Glass Fiber Reinforcement, 20%)

General

Material Status

Availability

Filler / Reinforcement

Features

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (275°C/2.16 kg)		--	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (275°C/2.16 kg)		--	in³/10min	ISO 1133
Molding Shrinkage		--	%
Water Absorption				ISO 62
Saturation, 73°F		--	%
Equilibrium, 73°F, 50% RH		--	%
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2
Tensile Stress (Break)			psi	ISO 527-2
Tensile Strain (Break)			%	ISO 527-2
Flexural Modulus			psi	ISO 178
Flexural Strength			psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)			ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)			ft·lb/in²	ISO 179
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed			°F	ISO 75-2/B
264 psi, Unannealed			°F	ISO 75-2/A
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL (0.0630 in)		--		UL 94
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Reny® G07S, Reny G07S, Reny® , Reny, RenyG07S, G 07 S, G07S, G07, 07S, Polyarylamide, PARA, Polyamide, Nylon, Mitsubishi EP, 07G
Features
Dry	Features may also be described by the following terms: Low Friction, Good Wear Resistance, Wear Resistant.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Reny® G07S, Reny G07S, Reny® , Reny, RenyG07S, G 07 S, G07S, G07, 07S, Polyarylamide, PARA, Polyamide, Nylon, Mitsubishi EP, 07G

Notes

¹Typical properties: these are not to be construed as specifications.

Reny® G07S