IDES Prospector Already have an account? Login Here

IDES

Bayblend® FR 3001

Acrylonitrile Butadiene Styrene + PC

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Bayblend® FR 3001 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Bayblend FR 3001 is a easy flow, non-reinforced, flame-retardant, amorphous, thermoplastic polymer blend on the basis of polycarbonate (PC) and acrylonitrile butadiene styrene copolymer (ABS). The flame retardant contains no antimony, bromine or chlorine.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Flame Retardant
Features 
  • Amorphous
  • Antimony Free
  • Bromine Free
  • Chlorine Free
  • Flame Retardant
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
lb/in³
 ISO 1183 2
Melt Mass-Flow Rate (MFR) (240°C/5.0 kg)
g/10 min
 ASTM D1238
Melt volume-flow rate (240°C/5.0 kg)
in³/10min
 ISO 1133 2
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Water Absorption
      
Saturation, 73°F
%
 ASTM D570
Saturation
%
 ISO 62 2
Equilibrium, 73°F, 50% RH
%
 ASTM D570
Equilibrium
%
 ISO 62 2
Spiral Flow Length (490°F, 0.10 in)
in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638, ISO 527-2 2
Tensile Strength
      
Yield
psi
 ASTM D638, ISO 527-2 2
Break
psi
 ASTM D638
Tensile Elongation
      
Yield
%
 ASTM D638, ISO 527-2 2
Break
%
 ASTM D638
Nominal strain at break
%
 ISO 527-2 2
Flexural Modulus
psi
 ASTM D790
Flexural Strength (5.0% Strain)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Unnotched Izod Impact
 
 ASTM D256
Instrumented Dart Impact 3, 4 (73°F, 0.125 in, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed, 0.250 in
°F
 ASTM D648
66 psi
°F
 ISO 75-2 2
264 psi, Unannealed, 0.250 in
°F
 ASTM D648
264 psi
°F
 ISO 75-2 2
Vicat Softening Temperature
      
--
°F
 ASTM D1525 5
50°C/h, B (50N)
°F
 ISO 306 2
CLTE
      
Flow
in/in/°F
 ASTM D696, ISO 11359-2 2
Transverse
in/in/°F
 ISO 11359-2 2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
      
--
ohms
 IEC 60093
--
ohms
 IEC 60093 2
Volume Resistivity
      
--
ohm·cm
 IEC 60093
--
ohm·in
 IEC 60093 2
Relative Permittivity
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Comparative Tracking Index
      
--
V
 IEC 60112
--
 
 IEC 60112 2
Electric Strength
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0591 in
 
  
0.0787 in
 
  
0.118 in
 
  
Burning Behav. at 1.6mm nom. thickn. (0.06 in, UL)
 
 ISO 1210 2
Burning Behav. 5V at thickness h (0.118 in, UL)
 
 ISO 10351 2
Oxygen Index
%
 ASTM D2863
UL
Nominal Value
Unit
Test Method
RTI Str (0.0591 in)
°F
 UL 746
RTI Imp (0.0591 in)
°F
 UL 746
RTI Elec (0.0591 in)
°F
 UL 746
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (500°F, 1000 sec^-1)
Pa·s
 ASTM D3835
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bayblend® FR 3001, Bayblend FR 3001, Bayblend® , Bayblend, BayblendFR3001, FR 3001, FR3001, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Bayer, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 3001FR
Features
Features may also be described by the following terms: No Antimony, Antimony free, Bromine Free, No Bromine Content, No Chlorine Content, Chlorine Free.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (3).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
322.0 ft/sec
40.5 in dart, 3 in clamp
5Rate B (120°C/h)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.