Arnite A06 700 DSM EP Polyethylene Terephthalate

General

Material Status

Availability

Features

RoHS Compliance

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density
--		g/cm³	ISO 1183
--		lb/in³	ISO 1183²
Water Absorption
Equilibrium, 73°F, 50% RH		%	ISO 62
Equilibrium		%	ISO 62²
Mechanical	Nominal Value	Unit	Test Method
Tensile modulus		psi	ISO 527-2²
Tensile Stress (Yield)		psi	ISO 527-2²
Tensile Strain (Yield)		%	ISO 527-2²
Nominal strain at break		%	ISO 527-2²
Impact	Nominal Value	Unit	Test Method
Charpy impact strength (73°F)		ft·lb/in²	ISO 179/1eU²
Thermal	Nominal Value	Unit	Test Method
Melting Temperature
--³		°F	ISO 11357-3
--⁴		°F	ISO 11357-3²
CLTE			ISO 11359-2²
Flow		in/in/°F
Transverse		in/in/°F
Electrical	Nominal Value	Unit	Test Method
Surface resistivity		ohms	IEC 60093²
Volume resistivity		ohm·in	IEC 60093²
Fill Analysis	Nominal Value	Unit	Test Method
Specific Heat Capacity of Melt		kJ/kg/K
Thermal Conductivity of Melt		Btu·in/hr/ft²/°F
Additional Information	Nominal Value	Unit	Test Method
RSV⁵			Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Arnite® A06 700, Arnite A06 700, Arnite® , Arnite, ArniteA06700, A 06 700, A06 700, A06, 06700, A06700, Polyethylene Terephthalate, PET, Polyester, DSM EP, PolyethyleneTerephthalate, 06A
Features
Features may also be described by the following terms: Very High Viscosity, Good Impact Resistance.

Notes

¹Typical properties: these are not to be construed as specifications.

²Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

³10°C/min

⁴18 °F/min

⁵m-cresol, 1g/100ml

Arnite® A06 700