IDES Prospector Already have an account? Login Here

IDES

Stanyl® TS200F6

Polyamide 46

Glass Fiber Reinforcement, 30%

Supplied by DSM Engineering Plastics

The technical datasheet with complete property values for Stanyl® TS200F6 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
RoHS Compliance 
Forms 
  • Pellets
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
 ISO 1183
Molding Shrinkage
       ISO 294-4
Across Flow
--
%
  
Flow
--
%
  
Water Absorption (Equilibrium, 73°F, 50% RH)
--
%
 ISO 62
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
       ISO 527-2
--
psi
  
248°F
--
psi
  
320°F
--
psi
  
356°F
--
psi
  
392°F
--
psi
  
Tensile Stress
       ISO 527-2
Break
psi
  
Break, 248°F
--
psi
  
Break, 320°F
--
psi
  
Break, 356°F
--
psi
  
Break, 392°F
--
psi
  
Tensile Strain
       ISO 527-2
Break
%
  
Break, 248°F
--
%
  
Break, 320°F
--
%
  
Break, 356°F
--
%
  
Break, 392°F
--
%
  
Flexural Modulus
       ISO 178
--
psi
  
248°F
--
psi
  
320°F
--
psi
  
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
       ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
       ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact Strength
       ISO 180/1A
-40°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
--
°F
 ISO 75-2/A
Melting Temperature
--
°F
 ISO 11357-3
CLTE
       ISO 11359-2
Flow
--
in/in/°F
  
Transverse
--
in/in/°F
  
Thermal Index - 5000 hr
--
°F
 IEC 60216
Electrical
Dry
Conditioned
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Comparative Tracking Index
--
V
 IEC 60112
Electric Strength
V/mil
 IEC 60243-1
Flammability
Dry
Conditioned
Unit
Test Method
Flammability Classification
       IEC 60695-11-10, -20
0.0327 in
--
 
  
0.0591 in
--
 
  
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Stanyl® TS200F6, Stanyl TS200F6, Stanyl® , Stanyl, StanylTS200F6, TS 200 F 6, TS200F6, TS200, 200F, F6, Polyamide 46, Nylon 46, Polyamide, Nylon, pa46, DSM EP, Polyamide46, Nylon46, 200TS
Generic Name
Dry
Generic Name may also be described by the following terms: PA46.
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Stanyl® TS200F6, Stanyl TS200F6, Stanyl® , Stanyl, StanylTS200F6, TS 200 F 6, TS200F6, TS200, 200F, F6, Polyamide 46, Nylon 46, Polyamide, Nylon, pa46, DSM EP, Polyamide46, Nylon46, 200TS

Generic Name may also be described by the following terms: PA46.
Injection
Dry
Unit
 
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Back Pressure
psi
  
Vent Depth
in
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.