IDES Prospector Already have an account? Login Here

IDES

Xantar® C CE 407

Acrylonitrile Butadiene Styrene + PC

Supplied by Mitsubishi Engineering-Plastics Corp

The technical datasheet with complete property values for Xantar® C CE 407 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Europe
Additive 
  • Flame Retardant
  • Mold Release
  
Features 
  • Flame Retardant
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Profile Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
      
--
g/cm³
 ISO 1183
--
lb/in³
 ISO 1183 2
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage - Flow
%
 ISO 294-4
Water Absorption
      
Saturation, 73°F
%
 ISO 62
Saturation
%
 ISO 62 2
Equilibrium
%
 ISO 62 2
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Nominal Tensile Strain at Break
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
 
  
73°F
 
  
Notched Izod Impact Strength
     ISO 180/1A
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
264 psi, Unannealed
°F
 ISO 75-2/A
264 psi
°F
 ISO 75-2 2
Vicat Softening Temperature
      
--
°F
 ISO 306/B50
50°C/h, B (50N)
°F
 ISO 306 2
Ball Pressure Test (230°F)
 
 IEC 60695-10-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
      
--
ohm·cm
 IEC 60093
--
ohm·in
 IEC 60093 2
Relative Permittivity (1 MHz)
 
 IEC 60250
Comparative Tracking Index
      
--
V
 IEC 60112
--
 
 IEC 60112 2
Flammability
Nominal Value
Unit
Test Method
Burning Behav. at 1.6mm nom. thickn. (0.06 in, UL)
 
 ISO 1210 2
Burning Behav. at thickness h (0.118 in, UL)
 
 ISO 1210 2
Flammability Classification
     IEC 60695-11-10, -20
0.0591 in
 
  
0.118 in
 
  
Glow Wire Flammability Index
     IEC 60695-2-12
0.0591 in
°F
  
0.118 in
°F
  
Glow Wire Ignition Temperature
     IEC 60695-2-13
0.0591 in
°F
  
0.118 in
°F
  
Oxygen Index
%
 ISO 4589-2
UL
Nominal Value
Unit
Test Method
Comparative Tracking Index (CTI) (PLC)
 
 UL 746
Fill Analysis
Nominal Value
Unit
Test Method
Thermal Conductivity of Melt
Btu·in/hr/ft²/°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Xantar® C CE 407, Xantar C CE 407, Xantar® C , Xantar C, XantarCCE407, XantarC, CCE 407, CCE407, CE 407, CE407, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Mitsubishi EP, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 407CE, 407CCE
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.