Xantar C CM 406 Mitsubishi EP Acrylonitrile Butadiene Styrene + PC

General
Material Status	Commercial: Active
Availability	Europe
Additive	Mold Release
Features	General Purpose
Uses	General Purpose
RoHS Compliance
Automotive Specifications
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density
--		g/cm³	ISO 1183
--		lb/in³	ISO 1183²
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)		in³/10min	ISO 1133
Molding Shrinkage - Flow		%	ISO 294-4
Water Absorption
Saturation, 73°F		%	ISO 62
Saturation		%	ISO 62²
Equilibrium		%	ISO 62²
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Yield)		%	ISO 527-2
Nominal Tensile Strain at Break		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F
73°F
Notched Izod Impact Strength			ISO 180/1A
-40°F		ft·lb/in²
-4°F		ft·lb/in²
73°F		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
264 psi, Unannealed		°F	ISO 75-2/A
264 psi		°F	ISO 75-2²
Vicat Softening Temperature
--		°F	ISO 306/B50
50°C/h, B (50N)		°F	ISO 306²
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity
--		ohm·cm	IEC 60093
--		ohm·in	IEC 60093²
Relative Permittivity (1 MHz)			IEC 60250
Comparative Tracking Index
--		V	IEC 60112
--			IEC 60112²
Electric Strength		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Burning Behav. at 1.6mm nom. thickn. (0.06 in, UL)			ISO 1210²
Burning Behav. at thickness h (0.118 in, UL)			ISO 1210²
Flammability Classification			IEC 60695-11-10, -20
0.0591 in
0.118 in
Glow Wire Flammability Index (0.0591 in)		°F	IEC 60695-2-12
Glow Wire Ignition Temperature			IEC 60695-2-13
0.0591 in		°F
0.118 in		°F
Oxygen Index		%	ISO 4589-2
UL	Nominal Value	Unit	Test Method
Comparative Tracking Index (CTI) (PLC)			UL 746
Fill Analysis	Nominal Value	Unit	Test Method
Thermal Conductivity of Melt		Btu·in/hr/ft²/°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Xantar® C CM 406, Xantar C CM 406, Xantar® C , Xantar C, XantarCCM406, XantarC, CCM 406, CCM406, CM 406, CM406, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Mitsubishi EP, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 406CM, 406CCM
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

Xantar® C CM 406

Acrylonitrile Butadiene Styrene + PC

Supplied by Mitsubishi Engineering-Plastics Corp