IDES Prospector Already have an account? Login Here

IDES

Xantar® C CM 406 FD

Acrylonitrile Butadiene Styrene + PC

Supplied by Mitsubishi Engineering-Plastics Corp

The technical datasheet with complete property values for Xantar® C CM 406 FD is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Mold Release
Features 
  • Food Contact Acceptable
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
     
--
g/cm³
ISO 1183
--
lb/in³
ISO 1183 2
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)
in³/10min
ISO 1133
Molding Shrinkage - Flow
%
ISO 294-4
Water Absorption
     
Saturation, 73°F
%
ISO 62
Saturation
%
ISO 62 2
Equilibrium
%
ISO 62 2
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Yield)
psi
ISO 527-2
Tensile Strain (Yield)
%
ISO 527-2
Nominal Tensile Strain at Break
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
    ISO 179/1eU
-22°F
 
 
73°F
 
 
Notched Izod Impact Strength
    ISO 180/1A
-40°F
ft·lb/in²
 
-4°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
264 psi, Unannealed
°F
ISO 75-2/A
264 psi
°F
ISO 75-2 2
Vicat Softening Temperature
     
--
°F
ISO 306/B50
50°C/h, B (50N)
°F
ISO 306 2
CLTE
    ISO 11359-2
Flow
in/in/°F
 
Transverse
in/in/°F
 
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
     
--
ohm·cm
IEC 60093
--
ohm·in
IEC 60093 2
Relative Permittivity (1 MHz)
 
IEC 60250
Comparative Tracking Index
     
--
V
IEC 60112
--
 
IEC 60112 2
Electric Strength
V/mil
IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Burning Behav. at 1.6mm nom. thickn. (0.06 in)
 
ISO 1210 2
Burning Behav. at thickness h (0.118 in)
 
ISO 1210 2
Flammability Classification
    IEC 60695-11-10, -20
0.0591 in
 
 
0.118 in
 
 
Glow Wire Flammability Index (0.0591 in)
°F
IEC 60695-2-12
Glow Wire Ignition Temperature (0.118 in)
°F
IEC 60695-2-13
Oxygen Index
%
ISO 4589-2
UL
Nominal Value
Unit
Test Method
Comparative Tracking Index (CTI) (PLC)
 
UL 746
Fill Analysis
Nominal Value
Unit
Test Method
Thermal Conductivity of Melt
Btu·in/hr/ft²/°F
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Xantar® C CM 406 FD, Xantar C CM 406 FD, Xantar® C , Xantar C, XantarCCM406FD, XantarC, CCM 406 FD, CCM406, CCM406FD, CM 406 FD, CM406, 406FD, CM406FD, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Mitsubishi EP, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 406CM, 406CCM
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.