IDES Prospector Already have an account? Login Here

IDES

J-REX HD KE016A

High Density Polyethylene

Supplied by Japan Polyolefins Co., Ltd. (JPO)

The technical datasheet with complete property values for J-REX HD KE016A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Features 
  • High Density
Uses 
  • Cable Jacketing
  • Pipe Coatings
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
ft·lb/in²
 ISO 180
Tensile Impact Strength
ft·lb/in²
 ASTM D1822
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
 DSC
Additional Information
Most properties were tested in accordance with JIS test standards
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: J-REX HD KE016A, JREX HD KE016A, J-REX HD , JREX HD, J:REX HD, J/REX HD, J+REX HD, J_REX HD, J REX HD, JREXHDKE016A, JREXHD, HDKE 016 A, J_REXHD, HDKE016A, HDKE016, HD, KE 016 A, KE016A, KE016, 016A, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, JPO, PolyethyleneHighDensity, 016KE, 016HDKE
Features
Features may also be described by the following terms: High Density, High Specific Gravity.
Uses
Uses may also be described by the following terms: Pipe Coatings, Pipe Coating.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.