IDES Prospector Already have an account? Login Here

IDES

INEOS HDPE B53-35H-011

High Density Polyethylene

Supplied by INEOS Olefins & Polymers USA

The technical datasheet with complete property values for INEOS HDPE B53-35H-011 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
B53-35H-011 is a high density polyethylene copolymer developed for blow molding applications. This
product is recommended for use in applications which require a combination of high top load strength
and good environmental stress crack resistance (ESCR). This material meets the Food and Drug
Administration requirements of 21CFR 177.1520.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Copolymer
  • Food Contact Acceptable
  • Good Strength
  • High Density
  • High ESCR (Stress Crack Resist.)
Uses 
  • Blow Molding Applications
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D4883
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus - Tangent
psi
 ASTM D638
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Apparent Bending Modulus
psi
 ASTM D747
Flexural Modulus - Tangent
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Tensile Impact Strength
ft·lb/in²
 ASTM D1822
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS HDPE B53-35H-011, INEOS HDPE B5335H011, INEOS HDPE , INEOSHDPEB5335H011, INEOSHDPE, B 53, HDPEB 53 35 H 011, HDPEB 53, HDPEB53-35H-011, HDPEB5335H011, HDPEB53:35H:011, HDPEB53/35H/011, HDPEB53+35H+011, HDPEB53_35H_011, HDPEB53 35H 011, HDPEB53, B 53 35 H 011, B53-35H-011, B5335H011, B53:35H:011, B53/35H/011, B53+35H+011, B53_35H_011, B53 35H 011, B53, 5335, 35H, H011, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Ineos USA, PolyethyleneHighDensity, 53B, 53HDPEB
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Strength, High Density, High Specific Gravity.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.