IDES Prospector Already have an account? Login Here

IDES

INEOS HDPE G60-25-144

High Density Polyethylene

Supplied by INEOS Olefins & Polymers USA

The technical datasheet with complete property values for INEOS HDPE G60-25-144 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
G60-25-144 is a high density polyethylene homopolymer typically used in the production of sheet extrusion and blow molded containers. This material meets the Food and Drug Administration requirements of 21CFR 177.1520.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Food Contact Acceptable
  • High Density
  • Homopolymer
Uses 
  • Blown Containers
  • Sheet
  
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Sheet Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D4883
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Apparent Bending Modulus
psi
 ASTM D747
Flexural Modulus - Tangent
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Tensile Impact Strength 3
ft·lb/in²
 ASTM D1822
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS HDPE G60-25-144, INEOS HDPE G6025144, INEOS HDPE , INEOSHDPEG6025144, INEOSHDPE, G 60, HDPEG 60 25 144, HDPEG 60, HDPEG60-25-144, HDPEG6025144, HDPEG60:25:144, HDPEG60/25/144, HDPEG60+25+144, HDPEG60_25_144, HDPEG60 25 144, HDPEG60, G 60 25 144, G60-25-144, G6025144, G60:25:144, G60/25/144, G60+25+144, G60_25_144, G60 25 144, G60, 6025, 25144, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Ineos USA, PolyethyleneHighDensity, 60G, 60HDPEG
Features
Features may also be described by the following terms: High Density, High Specific Gravity.
Uses
Uses may also be described by the following terms: Blow Containers, Blown Container.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Type L
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.