IDES Prospector Already have an account? Login Here

IDES

EXCELLOY SXJ220

Acrylonitrile Butadiene Styrene

Supplied by Techno Polymer America, Inc.

The technical datasheet with complete property values for EXCELLOY SXJ220 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Additive 
  • Antistatic
Features 
  • Antistatic
  • Semi Conductive
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
      
Yield
psi
 ISO 527-2
--
psi
 ASTM D638
Flexural Modulus
      
--
psi
 ASTM D790
--
psi
 ISO 178
Flexural Strength
      
--
psi
 ASTM D790
--
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179
Notched Izod Impact
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785, ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed
°F
 ASTM D648
66 psi, Unannealed
°F
 ISO 75-2/B
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 ASTM D257
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (ALL)
 
 UL 94
UL File Number
 
  
Additional Information
Static Voltage, JIS L1094: 750 V
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EXCELLOY SXJ220, EXCELLOY , EXCELLOYSXJ220, SXJ 220, SXJ220, Acrylonitrile Butadiene Styrene, ABS, Techno Polymer, AcrylonitrileButadieneStyrene, 220SXJ
Features
Features may also be described by the following terms: Semi-Conductive, Semi Conductive.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.