IDES Prospector Already have an account? Login Here

IDES

FERREX® GPP20CS07NA

Polypropylene

Calcium Carbonate Filler, 21%

Supplied by Ferro Corporation

The technical datasheet with complete property values for FERREX® GPP20CS07NA is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Calcium Carbonate Filler, 21% Filler by Weight
Additive 
  • Impact Modifier
Features 
  • Good Impact Resistance
  • High Gloss
  • Impact Modified
Uses 
  • Housings
  • Lawn and Garden Equipment
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus
     ASTM D790
1% Secant: 73°F
psi
  
Tangent: 73°F
psi
  
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Gardner Impact (73°F, 0.125 in)
in·lb
 ASTM D5420
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Additional Information
The value listed as Unnotched Izod Impact, ASTM D256, was tested in accordance with ASTM D4812.
Elongation @ break, 73°F, ASTM D638: >200%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: FERREX® GPP20CS07NA, FERREX GPP20CS07NA, FERREX® , FERREX, FERREXGPP20CS07NA, GPP 20 CS 07 NA, GPP20CS07NA, GPP20, 20CS, CS07, 07NA, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Ferro, PolypropyleneUnspecified, PPUnspecified, 20GPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Gloss, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Lawn and Garden Equipment, Lawn Equipment, Garden Equipment, Housings, Housing.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Clamp Tonnage
tons/in²
  
Screw L/D Ratio
 
  
Screw Compression Ratio
 
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.