WONDERLITE® PC-115 Chi Mei Polycarbonate

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Features

Low Viscosity

RoHS Compliance

Forms

Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)		g/10 min	ASTM D1238
Melt Volume-Flow Rate (MVR) (300°C/1.2 kg)		in³/10min	ISO 1133
Water Absorption (73°F, 24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength
Yield, 73°F		psi	ASTM D638
Yield		psi	ISO 527-2/50
Break		psi	ISO 527-2/50
Tensile Elongation
Yield, 73°F		%	ASTM D638
Yield		%	ISO 527-2/50
Break, 73°F		%	ASTM D638
Flexural Modulus
73°F		psi	ASTM D790
--²		psi	ISO 178
Flexural Strength
--²		psi	ISO 178
Yield, 73°F		psi	ASTM D790
Compressive Strength		psi	ASTM D695
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179
Notched Izod Impact
0.125 in		ft·lb/in	ASTM D256
0.250 in		ft·lb/in	ASTM D256
--		ft·lb/in²	ISO 180
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)			ASTM D785
Ball Indentation Hardness		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed		°F	ASTM D648
264 psi, Unannealed		°F	ASTM D648
264 psi, Unannealed		°F	ISO 75-2/A
264 psi, Annealed		°F	ISO 75-2/A
Vicat Softening Temperature
--		°F	ASTM D1525³, ISO 306/50³
--⁴		°F	ISO 306/50
CLTE - Flow (104 to 212°F)		in/in/°F	ASTM D696
Thermal Conductivity		Btu·in/hr/ft²/°F	ASTM C177
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	ASTM D257
Dielectric Strength (0.0630 in)		V/mil	ASTM D149
Dielectric Constant			ASTM D150
60 Hz
1 MHz
Dissipation Factor			ASTM D150
60 Hz
1 MHz
Arc Resistance		sec	ASTM D495
Arc Resistance (PLC)			ASTM D495
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.118 in, ALL
0.0157 in, ALL
0.0591 in, ALL
0.0984 in
0.104 in, ALL⁵
UL File Number
UL	Nominal Value	Unit	Test Method
RTI Str			UL 746
0.0157 in		°F
0.0591 in		°F
0.0984 in		°F
0.118 in		°F
RTI Imp			UL 746
0.0157 in		°F
0.0591 in		°F
0.0984 in		°F
0.118 in		°F
RTI Elec			UL 746
0.0157 in		°F
0.0591 in		°F
0.0984 in		°F
0.118 in		°F
Comparative Tracking Index (CTI) (PLC)			UL 746
High Voltage Arc Tracking Rate (HVTR) (PLC)			UL 746
Hot-wire Ignition (HWI) (PLC)			UL 746
0.0157 in
0.0591 in
0.0984 in
0.118 in
High Amp Arc Ignition (HAI) (PLC)			UL 746
0.0157 in
0.0591 in
0.0984 in
0.118 in
Optical	Nominal Value	Unit	Test Method
Refractive Index			ASTM D542
Transmittance (118 mil)		%	ASTM D1003
Haze (126 mil)		%	ASTM D1003
Related Terminology
This supplier and product may also be known by these terms: ChiMei Product names can be difficult to match. You may have searched any one of these terms to find this product: WONDERLITE® PC-115, WONDERLITE PC115, WONDERLITE® , WONDERLITE, WONDERLITEPC115, PC, PC-115, PC115, PC:115, PC/115, PC+115, PC_115, PC 115, Polycarbonate, Chi Mei, 115PC
Features
Features may also be described by the following terms: Low Viscosity.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²0.079 in/min

³Rate A (50°C/h), Loading 1 (10 N)

⁴5 Kg

⁵Thickness: 2.5-2.8 mm

WONDERLITE® PC-115

Polycarbonate

Supplied by CHI MEI CORPORATION