IDES Prospector Already have an account? Login Here

IDES

Ipethene® 113

Low Density Polyethylene

Supplied by Carmel Olefins Ltd.

The technical datasheet with complete property values for Ipethene® 113 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ipethene® 113 is a general purpose low density polyethylene film extrusion grade. It contains a medium level of anti-block and slip additives. It is BHT free. It exhibits a good balance between mechanical and optical properties
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Additive 
  • Medium Antiblock
  • Medium Slip
  
Features 
  • BHT Free
  • Medium Antiblocking
  • Medium Slip
  • Opticals
  
Uses 
  • Bags
  • Film
  • Laminates
  • Packaging
  • Shrink Wrap
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/C
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Films
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-3
MD: Break, 2.0 mil
psi
  
TD: Break, 2.0 mil
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 2.0 mil
%
  
TD: Break, 2.0 mil
%
  
Dart Drop Impact (2.0 mil)
g
 ISO 7765-1/A
Elmendorf Tear Strength
     ISO 6383-2
MD: 2.0 mil
lbf
  
TD: 2.0 mil
lbf
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil)
 
 ASTM D2457
Haze (1.97 mil)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ipethene® 113, Ipethene 113, Ipethene® , Ipethene, Ipethene113, 113, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Carmel Olefins, PolyethyleneLowDensity
Features
Features may also be described by the following terms: Medium Antiblocking, Medium Antiblock, Medium Slip.
Uses
Uses may also be described by the following terms: Shrink Wrap.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.