IDES Prospector Already have an account? Login Here

IDES

DENIFORM 0037

Acetal (POM) Homopolymer

Supplied by Vamp Tech

The technical datasheet with complete property values for DENIFORM 0037 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
POM Supertough
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Ultra High Toughness
RoHS Compliance 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
g/10 min
 ASTM D1238, ISO 1133
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638, ISO 527-2
Tensile Elongation (Yield)
%
 ASTM D638, ISO 527-2
Flexural Modulus
psi
 ASTM D790, ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength
 
 ISO 179
Notched Izod Impact Strength
ft·lb/in²
 ISO 180
Unnotched Izod Impact
 
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load      
66 psi, Unannealed
°F
 ASTM D648, ISO 75-2/B
264 psi, Unannealed
°F
 ASTM D648, ISO 75-2/A
Vicat Softening Temperature      
--
°F
 ASTM D1525 2, ISO 306/A50 2
--
°F
 ASTM D1525 3, ISO 306/B50 3
CLTE - Flow
in/in/°F
 ASTM D696
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Comparative Tracking Index     IEC 60112
Solution A
V
  
Solution B
V
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL     UL 94
0.0315 in
 
  
0.0630 in
 
  
0.126 in
 
  
Oxygen Index
%
 ASTM D2863
Additional Information
Ball Indentation Hardness, DIN 53456, 23°C: 70 MN/m²
CTI, IEC 112, Solution A: >600V
CTI, IEC 112, Solution B: >600V
Elongation at Yield, ASTM D638: >50%
Strain at Yield, ISO 527:>50%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DENIFORM 0037, DENIFORM , DENIFORM0037, 0037, Acetal Homopolymer, Acetal Homopolymer, Acetal (POM) Homopolymer, Acetal POM Homopolymer, Acetal, pom, Vamp Tech, AcetalPOMHomopolymer
Features
Features may also be described by the following terms: Ultra High Toughness.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Rate A (50°C/h)
3Rate B (120°C/h)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.