IDES Prospector Already have an account? Login Here

IDES

DENIFORM 13

Acetal (POM) Homopolymer

Supplied by Vamp Tech

The technical datasheet with complete property values for DENIFORM 13 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
POM Medium viscosity
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Medium Viscosity
RoHS Compliance 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
g/10 min
 ASTM D1238, ISO 1133
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Elongation (Yield)
%
 ASTM D638, ISO 527-2
Flexural Modulus
psi
 ASTM D790, ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179
Notched Izod Impact Strength
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed
°F
 ASTM D648, ISO 75-2/B
264 psi, Unannealed
°F
 ASTM D648, ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ASTM D1525 2, ISO 306/A50 2
--
°F
 ASTM D1525 3, ISO 306/B50 3
CLTE - Flow
in/in/°F
 ASTM D696
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Comparative Tracking Index
     IEC 60112
Solution A
V
  
Solution B
V
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0315 in
 
  
0.0630 in
 
  
0.126 in
 
  
Additional Information
Ball Indentation Hardness, DIN 53456, 23°C: 83 MN/m²
Charpy Unnotched Impact Strength, ISO 6660: >150 kJ/m²
CTI, IEC 112, Solution A: >600V
CTI, IEC 112, Solution B: >600V
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DENIFORM 13, DENIFORM , DENIFORM13, 13, Acetal Homopolymer, Acetal Homopolymer, Acetal (POM) Homopolymer, Acetal POM Homopolymer, Acetal, pom, Vamp Tech, AcetalPOMHomopolymer
Features
Features may also be described by the following terms: Medium Viscosity.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Rate A (50°C/h)
3Rate B (120°C/h)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.