Already have an account?
Login Here
IDES
DENISAB 1015
Acrylonitrile Butadiene Styrene
Glass Bead, 10%
Supplied by Vamp Tech
The technical datasheet with complete property values for DENISAB 1015 is available to members of the
Prospector Plastics Database
.
Register to view full datasheet
.
Register to View Full Datasheet
General
Material Status
Commercial: Active
Availability
Europe
Filler / Reinforcement
Glass Bead, 10% Filler by Weight
Features
Good Dimensional Stability
Good Surface Finish
RoHS Compliance
Physical
Nominal Value
Unit
Test Method
Specific Gravity
--
ASTM D792
--
g/cm³
ISO 1183
Molding Shrinkage
Flow
in/in
ASTM D955
--
%
ISO 294-4
Water Absorption
24 hr
%
ASTM D570
73°F, 24 hr
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
(Break)
psi
ASTM D638
,
ISO 527-2
Tensile Elongation
(Break)
%
ASTM D638
,
ISO 527-2
Flexural Modulus
psi
ASTM D790
,
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
ft·lb/in²
ISO 180/1A
Unnotched Izod Impact Strength
ft·lb/in²
ISO 180
Notched Izod Impact
ft·lb/in²
ASTM D256
Unnotched Izod Impact
ft·lb/in²
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ISO 306/B
,
ASTM D1525
2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
UL 94
0.0315 in
0.0630 in
0.126 in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DENISAB 1015, DENISAB , DENISAB1015, 1015, Acrylonitrile Butadiene Styrene, ABS, Vamp Tech, AcrylonitrileButadieneStyrene
Features
Features may also be described by the following terms: Good Surface Finish, Good Dimensional Stability, Dimensionally Stable.
Injection
Nominal Value
Unit
Drying Temperature
°F
Processing (Melt) Temp
°F
Mold Temperature
°F
Notes
1
Typical properties: these are not to be construed as specifications.
2
Loading 2 (50 N)
Copyright © 2012
IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.