IDES Prospector Already have an account? Login Here

IDES

DENYL 6 0558 ST

Polyamide 6

Supplied by Vamp Tech

The technical datasheet with complete property values for DENYL 6 0558 ST is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PA 6 with elastomer High impact strength Conductive
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Europe
Additive 
  • Impact Modifier
Features 
  • Electrically Conductive
  • High Impact Resistance
  • Impact Modified
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638, ISO 527-2
Tensile Elongation (Yield)
%
 ASTM D638, ISO 527-2
Flexural Modulus
psi
 ASTM D790, ISO 178
Flexural Strength
      
--
psi
 ISO 178
Yield
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
ft·lb/in²
 ISO 180
Unnotched Izod Impact
 
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648, ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50, ASTM D1525 2
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0315 in
 
  
0.0630 in
 
  
0.126 in
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DENYL 6 0558 ST, DENYL , DENYL60558ST, 6 0558 ST, 60558, 0558ST, 60558ST, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Vamp Tech, Polyamide6, Nylon6, 05586
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: High Impact Resistance, Electrically Conductive, Conducts Electricity, Conductive.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Rate B (120°C/h)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.