IDES Prospector Already have an account? Login Here

IDES

DENYL 66 2535

Polyamide 66

Glass Fiber Reinforcement, 25%

Supplied by Vamp Tech

The technical datasheet with complete property values for DENYL 66 2535 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
25% glass fibre with PTFE Excellent stiffness Self lubricating
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 25% Filler by Weight
Features 
  • Good Stiffness
  • Self Lubricating
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638, ISO 527-2
Tensile Elongation (Yield)
%
 ASTM D638, ISO 527-2
Flexural Modulus
psi
 ASTM D790, ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648, ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50, ASTM D1525 2
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index
     IEC 60112
Solution A
V
  
Solution B
V
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0315 in
 
  
0.0630 in
 
  
0.126 in
 
  
Additional Information
Density, ASTM D1238: 1.45 to 1.48g/cm³
Density, ISO 1183: 1.45 to 1.48 g/cm³
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DENYL 66 2535, DENYL , DENYL662535, 66 2535, 662535, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Vamp Tech, Polyamide66, Nylon66, 253566
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Good Stiffness, Self-Lubricating, Self Lubricating.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Rate B (120°C/h)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.