VAMPLEN 3026 V0 CB Vamp Tech Polypropylene Homopolymer (Glass Fiber Reinforcement, 30%)

General

Material Status

Availability

Filler / Reinforcement

Features

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)		g/10 min	ASTM D1238, ISO 1133
Molding Shrinkage
Flow		in/in	ASTM D955
--		%	ISO 294-4
Water Absorption
24 hr		%	ASTM D570
73°F, 24 hr		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break)		psi	ASTM D638, ISO 527-2
Tensile Elongation (Break)		%	ASTM D638, ISO 527-2
Flexural Modulus		psi	ASTM D790, ISO 178
Flexural Strength		psi	ASTM D790, ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength		ft·lb/in²	ISO 180/1A
Notched Izod Impact		ft·lb/in²	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)		°F	ASTM D648, ISO 75-2/A
Max. Continuous Use Temperature		°F	Internal Method
Vicat Softening Temperature		°F	ISO 306/B, ASTM D1525²
Ball Pressure Test (257°F)			IEC 60695-10-2
Service Temperature		°F	IEC 60216
Electrical	Nominal Value	Unit	Test Method
Dielectric Strength		V/mil	ASTM D149, IEC 60243-1
Comparative Tracking Index (Solution A)		V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0630 in
0.126 in
Glow Wire Flammability Index		°F	IEC 60695-2-12
Oxygen Index		%	ASTM D2863, ISO 4589-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VAMPLEN 3026 V0 CB, VAMPLEN , VAMPLEN3026V0CB, 3026 V 0 CB, 3026 V0 CB, 3026V, V0, 0CB, 3026V0CB, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Vamp Tech, PolypropyleneHomopolymer, PPHomopolymer, V3026

Notes

¹Typical properties: these are not to be construed as specifications.

²Loading 2 (50 N)

VAMPLEN 3026 V0 CB