IDES Prospector Already have an account? Login Here

IDES

DENYL 66 0018

Polyamide 66

Supplied by Vamp Tech

The technical datasheet with complete property values for DENYL 66 0018 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Molybdenum Disulfide Lubricant
Features 
  • Self Lubricating
RoHS Compliance 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage
      
Flow
in/in
 ASTM D955
--
%
 ISO 294-4
Water Absorption
      
24 hr
%
 ASTM D570
73°F, 24 hr
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638, ISO 527-2
Tensile Elongation (Break)
%
 ASTM D638, ISO 527-2
Flexural Modulus
psi
 ASTM D790, ISO 178
Flexural Strength
psi
 ASTM D790, ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
ft·lb/in²
 ISO 180/1A
Notched Izod Impact
ft·lb/in²
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648, ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B, ASTM D1525 2
Ball Pressure Test
     IEC 60695-10-2
257°F
 
  
329°F
 
  
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index (Solution A)
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0315 in
 
  
0.0630 in
 
  
0.126 in
 
  
Oxygen Index
%
 ASTM D2863, ISO 4589-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DENYL 66 0018, DENYL , DENYL660018, 66 0018, 660018, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Vamp Tech, Polyamide66, Nylon66, 001866
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Self-Lubricating, Self Lubricating.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.