DENYL 66 4022 Vamp Tech Polyamide 66 (Mineral Filler, 40%)

Product Description

40% mineral filler Good stiffness, flow and surface appearance Good impact resistance

General

Material Status

Commercial: Discontinued

Availability

Europe

Filler / Reinforcement

Mineral Filler, 40% Filler by Weight

Features

Good Flow

Good Impact Resistance

Good Stiffness

Good Surface Finish

Forms

Pellets

Physical	Dry	Conditioned	Unit	Test Method
Specific Gravity
--		--		ASTM D792
--		--	g/cm³	ISO 1183
Molding Shrinkage - Flow		--	in/in	ASTM D955
Water Absorption (24 hr)		--	%	ASTM D570
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Strength (Yield)		--	psi	ASTM D638, ISO 527-2
Tensile Elongation (Yield)		--	%	ASTM D638, ISO 527-2
Flexural Modulus			psi	ASTM D790, ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Unnotched Impact Strength		--	ft·lb/in²	ISO 179
Notched Izod Impact Strength		--	ft·lb/in²	ISO 180
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed		--	°F	ASTM D648, ISO 75-2/B
264 psi, Unannealed		--	°F	ASTM D648, ISO 75-2/A
Vicat Softening Temperature
--		--	°F	ASTM D1525², ISO 306/A50²
--		--	°F	ASTM D1525³, ISO 306/B50³
Electrical	Dry	Conditioned	Unit	Test Method
Comparative Tracking Index				IEC 60112
Solution A		--	V
Solution B		--	V
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL				UL 94
0.0315 in		--
0.0630 in		--
0.126 in		--
Oxygen Index		--	%	ASTM D2863
Additional Information
Dry	Ball Penetration Test, IEC 335, 125 °C: Yes Ball Penetration Test, IEC 335, 165 °C: Yes Density, ASTM D1238: 1.45 to 1.49g/cm³ Density, ISO 1183: 1.45 to 1.49 g/cm³ Elongation at Yield, ASTM D638: 5 to 7 Operating Temperature Limit: 180°C Operating Temperature, IEC 216: 110°C Strain at Yield, ISO 527: 5 to 7%
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: DENYL 66 4022, DENYL , DENYL664022, 66 4022, 664022, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Vamp Tech, Polyamide66, Nylon66, 402266
Generic Name
Dry	Generic Name may also be described by the following terms: PA66.
Conditioned	Generic Name may also be described by the following terms: PA66.
Features
Dry	Features may also be described by the following terms: Good Surface Finish, Good Stiffness, Good Impact Resistance, Good Flow.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: DENYL 66 4022, DENYL , DENYL664022, 66 4022, 664022, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Vamp Tech, Polyamide66, Nylon66, 402266

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Rear Temperature		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Rate A (50°C/h)

³Rate B (120°C/h)

DENYL 66 4022

Polyamide 66

Mineral Filler, 40%

Supplied by Vamp Tech