IDES Prospector Already have an account? Login Here

IDES

SABIC® PPcompound PHC22-20

Polypropylene Copolymer

Talc Filler

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® PPcompound PHC22-20 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® PPcompound PHC22/20 is an UV stabilized talcum filled grade typically used in automotive interior applications. This filled copolymer has a excellent impact and stiffness although limited performance in scratch and flow.

SABIC®PPcompound PHC22/20 is a designated automotive grade.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Talc Filler
Additive 
  • Impact Modifier
  • UV Stabilizer
  
Features 
  • Copolymer
  • Good Impact Resistance
  • Good Stiffness
  • Impact Modified
  
Uses 
  • Automotive Applications
  • Automotive Interior Parts
  
Automotive Specifications 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage (24 hr)
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/5/50
Yield, 0.126 in, Injection Molded
psi
  
Break, 0.126 in, Injection Molded
psi
  
Tensile Strain (Break, 0.126 in, Injection Molded)
%
 ISO 527-2/5/50
Flexural Modulus 2 (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
 
 ISO 179/1eA
Charpy Unnotched Impact Strength (-40°F, Injection Molded)
 
 ISO 179/1eU
Notched Izod Impact Strength
     ISO 180/4A
-4°F, Injection Molded
ft·lb/in²
  
32°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Injection Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A
CLTE - Flow (-22 to 86°F)
in/in/°F
 ASTM D696
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PPcompound PHC22-20, SABIC PPcompound PHC2220, SABIC® PPcompound , SABIC PPcompound, SABICPPcompoundPHC2220, SABICPPcompound, PHC 22, PPcompoundPHC 22 20, PPcompoundPHC 22, PPcompoundPHC22-20, PPcompoundPHC2220, PPcompoundPHC22:20, PPcompoundPHC22/20, PPcompoundPHC22+20, PPcompoundPHC22_20, PPcompoundPHC22 20, PPcompoundPHC22, PHC 22 20, PHC22-20, PHC2220, PHC22:20, PHC22/20, PHC22+20, PHC22_20, PHC22 20, PHC22, 2220, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, SABIC, PolypropyleneCopolymer, PPCopolymer, 22PHC, 22PPcompoundPHC
Features
Features may also be described by the following terms: Good Impact Resistance, Good Stiffness.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): IMDS (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Method I (3 point load)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.