IDES Prospector Already have an account? Login Here

IDES

SABIC® PPcompound PHC25-20

Polypropylene Impact Copolymer

Talc Filler, 20%

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® PPcompound PHC25-20 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® PPcompound PHC25-20 is a talc-filled copolymer for use in applications which involve high requirements in terms of stiffness, thermal dimensional stability as well as impact resistance. Typical examples of applications are dashboard carriers and console column cladding.

SABIC® PPcompound PHC25-20 is a designated automotive grade.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Talc Filler, 20% Filler by Weight
Features 
  • Block Copolymer
  • Good Dimensional Stability
  • Good Impact Resistance
  • Good Stiffness
  
Uses 
  • Automotive Interior Parts
Automotive Specifications 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage (24 hr)
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/5/50
Yield, 0.126 in, Injection Molded
psi
  
Break, 0.126 in, Injection Molded
psi
  
Tensile Strain (Break, 0.126 in, Injection Molded)
%
 ISO 527-2/5/50
Flexural Modulus 2 (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (-40°F)
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact Strength
     ISO 180/4A
-4°F
ft·lb/in²
  
32°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
CLTE - Flow
in/in/°F
 ASTM D696
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PPcompound PHC25-20, SABIC PPcompound PHC2520, SABIC® PPcompound , SABIC PPcompound, SABICPPcompoundPHC2520, SABICPPcompound, PHC 25, PPcompoundPHC 25 20, PPcompoundPHC 25, PPcompoundPHC25-20, PPcompoundPHC2520, PPcompoundPHC25:20, PPcompoundPHC25/20, PPcompoundPHC25+20, PPcompoundPHC25_20, PPcompoundPHC25 20, PPcompoundPHC25, PHC 25 20, PHC25-20, PHC2520, PHC25:20, PHC25/20, PHC25+20, PHC25_20, PHC25 20, PHC25, 2520, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, SABIC, PolypropyleneImpactCopolymer, PPImpactCopolymer, 25PHC, 25PPcompoundPHC
Features
Features may also be described by the following terms: Good Stiffness, Good Impact Resistance, Good Dimensional Stability, Dimensionally Stable, Block Copolymer.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): IMDS (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Method I (3 point load)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.