SABIC® PP 412MN40 SABIC Polypropylene Impact Copolymer

Product Description

A multi-purpose grade with very good flow properties, high stiffness and good impact strength. The material has a very low tendency for warpage and is suited for the production of thin wall packaging articles. Cycle times can be very short. It is formulated with a combined processing and antistatic additive package. This grade is widely applied in thin wall technical injection moulded articles and thin-walled containers, in particular where dimensional stability
is important.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

General

Material Status

Commercial: Active

Availability

Europe

Additive

Antistatic

Processing Aid

Features

Antistatic

Block Copolymer

Fast Molding Cycle

Good Dimensional Stability

Good Flow

Good Impact Resistance

High Stiffness

Low Warpage

Uses

Thin-walled Packaging

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-2
Yield		psi
Break		psi
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179
-4°F		ft·lb/in²
32°F		ft·lb/in²
73°F		ft·lb/in²
Notched Izod Impact Strength			ISO 180/4A
-4°F		ft·lb/in²
32°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature
--		°F	ISO 306/A
--		°F	ISO 306/B
Flammability	Nominal Value	Unit	Test Method
UL File Number
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PP 412MN40, SABIC PP 412MN40, SABIC® PP , SABIC PP, SABICPP412MN40, SABICPP, PP 412 MN 40, PP412MN40, PP412, PP, 412 MN 40, 412MN40, 412MN, MN40, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, SABIC, PolypropyleneImpactCopolymer, PPImpactCopolymer, MN412, 412PP
Features
Features may also be described by the following terms: High Stiffness, Low Warpage, Low Warp, Good Impact Resistance, Good Flow, Good Dimensional Stability, Dimensionally Stable, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Block Copolymer.
Uses
Uses may also be described by the following terms: Thin-walled Packaging, Thin-wall Packaging, Thinwall Packaging.

Notes

¹Typical properties: these are not to be construed as specifications.

SABIC® PP 412MN40

Polypropylene Impact Copolymer

Supplied by Saudi Basic Industries Corporation (SABIC)