SABIC® PP 58MNK10 SABIC Polypropylene Impact Copolymer

Product Description

This grade combines an excellent stiffness with very good impact strength. It has a narrow molecular weight distribution and a very low tendency to warp. The easy flow, in combination with the high crystallisation temperature enables outstanding processability aimed at easy mould filling and short cycletimes. Due to the mentioned performance this grade is very suitable for usage in several kinds of containers. Because of its high gloss level this material is also suitable for household applications.

General

Material Status

Commercial: Active

Availability

Europe

Features

Block Copolymer

Fast Molding Cycle

Good Flow

Good Impact Resistance

Good Processability

Good Stiffness

High Gloss

Low Warpage

Narrow Molecular Weight Distribution

Uses

Containers

Household Goods

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-2
Yield		psi
Break		psi
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179
-4°F		ft·lb/in²
32°F		ft·lb/in²
73°F		ft·lb/in²
Notched Izod Impact Strength			ISO 180/4A
-4°F		ft·lb/in²
32°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature
--		°F	ISO 306/A
--		°F	ISO 306/B
Flammability	Nominal Value	Unit	Test Method
UL File Number
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PP 58MNK10, SABIC PP 58MNK10, SABIC® PP , SABIC PP, SABICPP58MNK10, SABICPP, PP 58 MNK 10, PP58MNK10, PP58, PP, 58 MNK 10, 58MNK10, 58MNK, MNK10, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, SABIC, PolypropyleneImpactCopolymer, PPImpactCopolymer, MNK58, 58PP
Features
Features may also be described by the following terms: Low Warpage, Low Warp, Good Stiffness, Good Processability, Easy Processing, Narrow Molecular Weight Distribution, Narrow MW Distribution, Good Impact Resistance, High Gloss, Good Flow, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Block Copolymer.
Uses
Uses may also be described by the following terms: Household Goods, Housewares.

Notes

¹Typical properties: these are not to be construed as specifications.

SABIC® PP 58MNK10

Polypropylene Impact Copolymer

Supplied by Saudi Basic Industries Corporation (SABIC)